Product Description
UST1102 CENTURY POOL PUMP MOTOR
Features: Capacitor Start Capacitor Run, Automatic Thermal Protection, Continuous Duty, Ball Bearings, Rolled Steel, 303 Stainless Steel Shaft, UL 1081 Design.
- 1 HP
- 3450 RPM
- 56J FRAME
- SINGLE PHASE
- 230/115 VOLT
- 7.5/15.0 AMP
- 1.1 S.F.
- SINGLE SPEED
- ODP
- CCW PUMP END
- NO BASE
- C-FACE
- 0.625" X 2.56" 7/16" THREADED SHAFT
- 13.53" OVERALL LENGTH
**VARIABLE SPEED MOTOR REPLACEMENT EVC130
NOTE: Electric Motors with dual voltage are normally shipped wired for 220 volts, remember to wire correctly to existing, an error will cause improper function and damage to the pump motor
Cross References: C48K2N117A9 C48K2N143 C48K2N143A3 C48K2N143A4 C48K2N143A5 C48K2N143A6 C48K2N143A9 168098 177019 B228 B228SE EB228 JD10UP1 54023 C1318 SP1607Z1M SP1607Z1MBK SP1607Z1MH C48K2N143B1 C48K2N143B3 c48aa35a01 K48K2PA105C3 SP2607X10 SP3007X10AZ Max-Flo SP2807X10 Cygnet 1CYG Magnum
ATTENTION: Shipping Restrictions Apply!
** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **
Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions
California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)
To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!