UQC1072 Square Flange Pool Motor 3/4 HP

Product Description

UQC1072 Century Square Flange Pool Motor

• 3/4 HP
• 3450 RPM 
• 48Y FRAME
• SINGLE PHASE
• 115/230 VOLT
• 9.5/4.75 AMP
• CCW PUMP END
• ODP
• AUTOMATIC OVERLOAD PROTECTION
• SHAFT 5/8" X 0.906" THREADED

FEATURES:  Service Factor 1.27 (service factor x H.P. = total output).  The swimming pool motors have a square mounting face for the pump attachment, with 4 non-threaded bolt holes to attach the pump. Motor has a threaded shaft. This type is common to most Sta-Rite, PacFab, Purex/Trition and WhisperFlo, Red Jacket, Sears, Challenger inground pool pumps. Single phase motors. (56Y motor body diameter is 1/2" larger than 48Y)

**VARIABLE SPEED MOTOR REPLACEMENT EVQ130

Cross References: K48J2PA105 11800

ATTENTION: Shipping Restrictions Apply! 

** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **

Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)

To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!