MDC33V1 Myers Cast Iron Sump Pump 1/3HP

Product Description

APPLICATIONS:  Basement Sump Dewatering

SPECIFICATIONS:

CAPACITIES Up to 62 GPM (234 LPM)
SHUT-OFF HEAD Up to 32' (9.75 m)
OPERATION On: 6-1/2" (165 mm) Off: 2" (51 mm)
SOLIDS HANDLING 1/2" (12.7 mm)
LIQUIDS HANDLING Drainage effluent
CONTINUOUS LIQUID TEMPERATURE 130*F (54*C)
MOTOR/ELECTRICAL DATA

• 1/3 HP
• 9.8 Amps
• Shaded pole with overload protection
• 115 V
• 60 Hz
• 1550 RPM

ACCEPTABLE pH RANGE 6-9
SHAFT SEAL Carbon and ceramic
HOUSING Heavy cast iron
POWER CORD 10'
DISCHARGE, NPT 1-1/2" (38 MM)
MIN. SUMP DIAMETER 10" (254 mm)

FEATURES:

SOLID AND RELIABLE High- endurance, oil-cooled motor provides continuous bearing lubrication and maximizes heat dissipation
ELIMINATES FAILURES Shaded pole motor eliminates failure-prone switches and relays
MOTOR PROTECTION Long life carbon/ceramic seal protects motor against water leakage
THERMAL OVERLOAD Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature
EXTENDED SERVICE Lubricated ball bearings and shaft seal for longer service life
NO DRILLING REQUIRED Anti-airlock hole in base reduces added labor
PIGGYBACK PLUG FOR CONVENIENCE Vertical and tethered switch models offer a piggyback plug for automatic operation

CROSS REFERENCES: V-A1, VS33A1, MCI033( same structure and mechanical settings. Only difference is the head of the pump-no internal switch anymore-it is a piggy back switch)