US Dollars
Euro
Canadian Dollar
Product Description
CENTURION PRO ® MOTORS POOL PUMP MOTOR
Premium Sealed 203 Bearings Both Ends, Open & Accessible Terminal Board & Wiring Compartment For Easy Installation, New Triple Seal Protection on Pump-End Bearing. Voltage Change Device, Definitive Shaft Access (7/16" Wrench). Electrical Type:Capacitor Start Induction Run
- Phase:1
- HP:1.65
- 230/115 V
- 3450 rpm
- Frame:48Y
- Enclosure:Open Drip Proof
- 9.4/18.8 A
- Speeds:1
- Poles:2
- Rotation:Counterclockwise
- Shaft Type:1/2 Thread
- Overall Length:14.12 in
- Frame Length:10.13 in
- Shaft Diameter:0.625 in
- Shaft Extension:0.906 in
**VARIABLE SPEED MOTOR REPLACEMENT EVQ165
ATTENTION: Shipping Restrictions Apply!
** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **
Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions
California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)
To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!