E-UB2984 OPEN BOX High Efficiency Square Flange Two-Speed Pool and Spa Motor

Product Description

E-UB2984 (Open Box) High Efficiency Square Flange Two-Speed Pool and Spa Motor

• Two-Speed - "1081" - PSC Energy Efficient High Speed - PSC Energy Efficient Low Speed - Square Flange - Full Rate
• HP - 2~.25
• RPM - 3450/1725
• Volts - 230
• Service Factor Amps - 11.0/1.8
• Service Factor - 1.30
• Frame - 56Y
• Shaft - Threaded
• Overload Protector - Auto
• Length Including Shaft - 14.4

Features:  Ball bearing, Class B Insulation, 50 Degree Ambient, Open Dripproof, Permanent Split Capacitor, Rotation: CCW Pump End, Single Phase, 303 Stainless Steel Shafts, Meets California Commission Appliance Regulations 2008

Important:  1.) Total output of replacement motor must equal or exceed motor being replaced. 2.) The pool motors on this page are NOT Equipped with a Safety Vacuum Release System SVRS. SVRS helps prevent drowning due to body entrapment on underwater drains. In some pool configurations, if a person's body covers the drain, the person can be trapped by suction. The SVRS turns off the pump if this occurs. Depending on your pool configuration, a SVRS may be required to meet local, state and federal requirements

TWO SPEED SWITCH CURRENTLY NOT AVAILABLE FOR THIS ITEM

Cross Reference: SQS1202R 165985 176894 177069 177146 177178 177351 190167 190183 190199 B963 EB984 C1313 35-5378 35

Disclaimer:

 All opened box products may have been previously installed. Signs of being installed which may include but not limited to bolt mark, set screw marks, and or cosmetic scratches. Item may not be in original factory box. All open boxed items have been restored to like-new condition and have been tested to ensure flawless operation. All opened box products will carry a one year warranty from date of purchase.

ATTENTION: Shipping Restrictions Apply! 

** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **

Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)

To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!