US Dollars
Euro
Canadian Dollar
Product Description
Century B2984 Pool Pump Motor
- 2.0/.25 HP
- 3450/1725 RPM
- Y56Y FRAME
- SINGLE PHASE
- 230 VOLT
- 11.0/1.8 AMP
- 1.3 S.F.
- ODP
- CCWPE
- ROUND
- SQUARE FLANGE
- 0.625" X 0.91" SHAFT 1/2" THREAD
- C-DIMENSION 14.40"
Features: Capacitor Start/Capacitor Run on High Speed, PSC on Low Speed, Sealed Ball Bearings, Stainless Steel Threaded Shaft, Energy Efficient, Thermally Protected, Rolled Steel, 303 Stainless Steel Shaft, Continuous Duty. Energy Efficient.
Important
1.) Total output of replacement motor must equal or exceed motor being replaced. 2.) The pool motors on this page are NOT equipped with a Safety Vacuum Release System SVRS . SVRS helps prevent drowning due to body entrapment on underwater drains. In some pool configurations, if a person's body covers the drain, the person can be trapped by suction. The SVRS turns off the pump if this occurs. Depending on your pool configuration, a SVRS may be required to meet local, state and federal requirements
TWO SPEED SWITCH CURRENTLY NOT AVAILABLE FOR THIS ITEM
Cross Reference: SQS1202R 165985 176894 177069 177146 177178 177351 190167 190183 190199 B963 EB984 C1313 35-5378 35-5511 5KCR49UN2096X C1313 MC1313 196159 ASB2984
ATTENTION: Shipping Restrictions Apply!
** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **
Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions
California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)
To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!