B2980 CENTURY POOL PUMP MOTOR 3/4 ~ .10 HP 3600 RPM R56Y FRAME

Product Description

CENTURY B2980 POOL PUMP MOTOR

Two-Speed Pool and Spa Motors

• 3/4 ~ .10 HP
• 3450/1725 RPM
• R56Y FRAME
• SINGLE PHASE
• 230 VOLT
• 5.8/0.9 AMP
• 1.67 S.F.
• DP
• CCWPE
• SQUARE FLANGE
• 0.625" x 0.91" THREADED SHAFT
• 13.10" C-DIMENSION

FEATURES:  PSC Low Speed, Hi Speed Capacitor Start/Capacitor Run. Thermally Protected, Continuous Duty, Sealed Ball Bearings, Rolled Steel, Horizontal Mount, 30-3 Stainless Steel Shaft, Two-Speed, Energy Efficient.

**VARIABLE SPEED MOTOR REPLACEMENT EVQ130 

Important
1.) Total output of replacement motor must equal or exceed motor being replaced. 2.) The pool motors on this page are NOT equipped with a Safety Vacuum Release System SVRS . SVRS helps prevent drowning due to body entrapment on underwater drains. In some pool configurations, if a person's body covers the drain, the person can be trapped by suction. The SVRS turns off the pump if this occurs. Depending on your pool configuration, a SVRS may be required to meet local, state and federal requirements


ITEM DOES NOT CURRENTLY HAVE TWO SPEED SWITCH AVAILABLE


Cross References: C48K2P105A1 SQS1072R 165981 177065 B965 EB980 12071 C1310 MC1310

ATTENTION: Shipping Restrictions Apply! 

** Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect **

Familiarize yourself with the building codes and laws in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
Click here for answers to frequently asked questions

California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: This replacement pump motor does not comply with New York's Efficiency Regulations. These regulations can be found at NYSERDA Section 509.23, New York is aligning with California’s Appliance Efficiency Standards (Title 20)

To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor. Please call or join us on chat if you have additional questions!