Overview Product Description APPLICATION: Go eco-friendly and watch your savings start to add up with a variable speed replacement motor for your swimming pool pump. Variable speed pumps allow you to program your pump to run at different speeds throughout the day so you achieve optimum flow at the lowest possible energy expenditure. This variable speed motor bolts right onto your existing pump housing and you start saving up to 90% immediately. EcoTech motors are energy efficient with a low amp draw, super quiet, and easy to program. They feature easy drop in installation with no complex wiring, a built-in programmable user interface with timer, freeze sensor, vacuum override and total enclosed fan cooling (TEFC) 1.5 HP Variable Speed 2.40 THP - This motor will replace any HP range 1/2-1.5 HP 230 Volt, 10.0 SF Amps, 1.60 Service Factor, 60hz Full Variable Speed (1035-3450 RPM) Timer Mode/Manual Mode/Vacuum Override 56J Frame; ECM Design Features Total Enclosed Fan Cooling, programmable user interface and freeze sensor Continuous duty, Class B Insulation, 50° C, Brushless permanent magnet motor 5/8" diameter threaded stainless steel shaft California Title 20 Compliant & 2021 New DOE Regulations Fits the following pumps:Hayward Super Pump, Super Pump IIAny pump that requires 56J frame motorReplaces Nidec EVSJ15-NS ATTENTION: Shipping Restrictions Apply!! Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect Please check your local and State codes to comply with their requirements for replacement pump motors. Click here for answers to frequently asked questions California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed. Product Videos Custom Field Product Reviews